Reinforced with a proprietary inconel wire matrix and impregnated with a high Sealability Compound and a Passive Corrosion Inhibitor
API Low Emission Packing Set 4337
Braided from specially formulated expanded graphite
EnviroStar 300
Pre-compressed Packing set of expanded graphite with Inconel Matrix reinforcement & special PTFE coating
Ring Set made from special high temperature resistant yarn
EnviroStar 400
Pre-compressed ring-set made of expanded graphite and reinforcement to protect against extrusion
Packingset made by combining two expanded Graphite grades and designs in order to avoid blow out and extrusion
Style 210
100% Para-Aramid continuous Fiber with PTFE-Blocking Agent and Silicone free dynamic Run In Lubricant
Excellent in highly abrasive products, Wear resistant universal packing.
Style 250TP AraStar
Para-Aramid Fiber Packing with PTFE Impregnation and Paraffin Run In Lubricant
Volume stable, pressure stable, High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media.
Style 270 - 274
Combination of ePTFE with Graphite & PTFE Fiber Corner Reinforcement
Very form stable, Recommended shaft surface hardness HRC 50
Style 275TP SlurryStar
Combination Braid of ePTFE with incorporated Graphite and Para-Aramid Fiber Corner Reinforcement
Reinforced packing with reduced wear through improved heat conductivity, Recommended shaft surface hardness: HRC 50
Style 285TP PaperStar
MetaAramid fibre with PTFE blocking agent and run-in lubricant.
'Clean packing’ required in applications where safety against contamination is required.
Style 290
Synthetic fibre with PTFE impregnation & silicon-free dynamic run-in lubricant
High durability and flexibility, Excellent chemical resistance (e.g. hydrofluoric acid 15%/50°C).
Style 299
Polyimid Fiber with PTFE Impregnation & Silicone Run In Lubricant
Characteristics, High fatigue strength and flexibility and Good acid resistance
Style 310
Carbon Filament Yarn with High Temperature Graphite Blocking Agent
High temperature blocking agent increases the cross section density and acts as a form stable pressure bed for the Carbographite fiber
Style 325
Carbon Staple fiber with special Graphite Impregnation and Paraffin Run-In Lubricant
Volume stable, pressure stable packing, High Cross section density due to special impregnation
Style 330
Carbonfiber with special impregnation and Silicone free dynamic Run-In Lubricant
Strong against abrasive mediums, yet low friction on shaft surface. Recommended shaft/sleeve hardness HRC 45.
Style 333
Combination braid from carbon reinforced expanded graphite tape & carbon fiber, with run-in lubricant
Self lubricating excellent use in pumps, minimizing the need of Flushwater
Style 337
Braided from expanded graphite tape, with inconel wire matrix reinforcement & special PTFE film coating
High cross section density and sealability to minimize emissions
Style 340
Braided of Flexible Expanded Graphite Tape with high temperature resistant Inconel-mesh reinforcement
Universal plant wide use in static applications
Style 343
Braided of Flexible Expanded Graphite Tape with High Temperature Inconel Mesh Reinforcement
Universal plant wide use in static applications
Style 350
Braid made of flexible, expanded natural graphite foil
Superb emergency running capability, no wear on the shaft, excellent thermal conductivity
Style 351
Braided from Expanded Graphite Tape with integrated Carbon fiber Reinforcement
Wear and extrusion stability through Carbon fiber reinforcement, self lubricating, excellent use in pumps, minimizing the need for flushwater
Style 355
Braid made of flexible, expanded natural graphite foil with integrated Inconel reinforcement per fibre strand
Highest quality pure graphite gives a coefficient of expansion similar to steel
Style 366TP
Braided from Carbon fiber and carbon reinforced expanded Graphite Tape
Non-hardening, good reset capability, coefficient of thermal expansion like steel.
Style 375
Highest grade Graphite Filament yarn with high temperature Graphite impregnation
The addition of high temperature Graphite impregnation increases the cross section density and works as a stable pressure cushion for the graphite fibre
Style 380TP
High puricity carbon-fibre with cross-section impregnation & run-in lubricant
Self lubricating fibre with high carbon content and excellent heat transfer
Style 725SI
100% PTFE - Fiber with special PTFE Dispersion & FDA conform Food Grade Silicone Oil impregnated
Highest chemical resistance for a packing in rotating equipment
Style 728TP PaperStar HS
Hybrid braid in W-Profile made of heat conductive ePTFE Yarn
Clean packing with ultimate heat conductivity for abrasive products in pumps and other rotating equipment.
Style 785
Braided from 100% GORE® GFO® expanded PTFE fibre with incorporated graphite & silicone run-in lubricant
Highly thermally conductive
Style 789TP ProStar
Hybrid-Braid made of ePTFE/ Graphite & Graphite Yarn
With additional X-Section Impregnation and Silicone Run In Lubricant
Style 790
PTFE-Graphite Multifilament Fiber with silicone free ‘run-in’ lubricant
Self lubricating and graphite-enhanced to give minimal friction and good heat conductivity
Style 795TP UniStar
Braid of ePTFE yarn with Graphite & Silicone Run-In Lubricant
Excellent heat conductivity, Very easy and safe assembly
