Learn about our environmental investment pledge
Reduce & Eliminate Emissions from Gas Compressors. EcoGuard™ is designed as part of a vent capture system that reduces the release of fugitive gases, which would typically be vented into the atmosphere or burned off through a flare during normal operations, in the Oil & Gas Industry.
The EcoGuard™ Emission Solution offers 3 primary methods of reducing and eliminating harmful gases, with the ability for each method to be easily installed to existing equipment:
Harmful gases used during operation are replaced with Nitrogen, meaning this inert gas is the only gas to leak to the atmosphere. Additionally, the Nitrogen is cooled to allow the seal to operate at higher pressures, speeds & temperatures.
Greenhouse gases that would normally be released to the atmosphere or burnt off via a flare are captured at source and are boosted by EcoGuard, allowing them to be reinjected back into the compressor or stored and used elsewhere by operators. During shutdown and static operation, unfiltered gas may enter Dry Gas Seals, causing damage and failure. To prevent this, operators vent the entire compressor the atmosphere. EcoGuard™ can provide
During shutdown and static operation, unfiltered gas may enter Dry Gas Seals, causing damage and failure. To prevent this, operators vent the entire compressor the atmosphere. EcoGuard™ can provide a supply of clean gas to the seals to eliminate the need for mass venting.
