The AGCS™ double seal is designed to fit the full six bearing frame range of the AhlstarUP pump models.
The AGCD™ and AGCS™ seals are designed to fit the full six bearing frame range of the AhlstarUP pump models.
The BDFI™/BDFC™ (Bellows Double Flow Induction/Convection) is an innovative modular hybrid design, created using the inboard design of a BQFD™ and the outboard design of a DMSF™.
Bellows Double Tandem Pumping seal is a highly-innovative hybrid design. The seal's directed barrier fluid flow path achieves optimum heat removal at both sets of seal faces.
The BQFD™ (Bellows Quench Flush Drain) range of single cartridge mechanical seals uses many of the same modular parts as a BSIV™
The BSAI™ range is available in a wide range of seal face and elastomer combinations, together with self-aligning, DIN, CURC™, T, L shaped or boot mounted stationaries.
This seal features graphite rings at every primary sealing surface, eliminating the need for elastomers.
The BSIV™ range of single cartridge mechanical seals has been designed as a value-for-money, high-performance sealing solution for general applications.
The AESSEAL® API Type A, B and C dual-seal range offers the user an unprecedented range of API engineered sealing solutions to suit all application requirements.
The AESSEAL® API Type A, B and C single-seal range offers the user an unprecedented range of API engineered sealing solutions to suit all application requirements.
CAPI-TXS-F incorporate API 682 qualified seal faces and components and is designed to fit old edition API 610 pumps with smaller seal chambers.
The hybrid design offers a metal-to-metal inboard drive and an integral bi-directional pumping device, allowing the seal to fit in radial cross sectional spaces as small as 0.312" (8mm)
The CDM™ cartridge double mechanical seal for mixers is available in a wide range of seal face, elastomer and alloy combinations, to suit individual applications.
This externally mounted cartridge seal has many features incorporated into the design to help increase seal life.
Designed as high-performance sealing solutions for general applications.
The CDPH™ double mechanical seal is designed to meet the arduous requirements of slurry applications. Large ports and increased radial clearances enable the seal to maintain a stable fluid film...
These robust seals are designed for use on difficult applications, including oil pipeline pumping, water injection and boiler feed duties.
These robust seals are designed for use on difficult applications, including oil pipeline pumping, water injection and boiler feed duties.
Stationary seal face technology to accommodate angular shaft to housing misalignment. Bi-directional flow induction (patent pending) for effective barrier heat removal
The CKSA™ and CKDA™ seals are designed to fit the full six bearing frame range of the AhlstarUP pump models.
The CKS™ single stationary cartridge seal range provides highly technical, value-engineered sealing solutions applicable for all industry sectors.
The seal uses a multi-spring design that ensures the seal faces are evenly leaded and therefore improve seal life
CLIP seal is ideally suited for slow-rotating equipment in the food, beverage and pharmaceutical industries. The seal design uses the latest monolithic lip seal technology.
The CMAX™ is a single cartridge seal that allows for axial movement.
Cartridge seal designed to replace two-part component seals and conventional packing arrangements.
The CSM™ cartridge single seal for mixers is available in a wide range of seal face, elastomer and alloy combinations, to suit individual applications.
Designed as high-performance sealing solutions for general applications. These products build on over a decade of proven performance from the AESSEAL CURC™ and FIDC™ range
The CSWIB™ (Mixmaster I) is a single cartridge mechanical seal, with balanced seal faces and an integral (steady) bearing.
The AESSEAL CURC™, CRCO™ and CURE™ mechanical seals are part of a range of seals specifically designed to optimize the use of Silicon Carbide.
The CVSD™ and CVSD-R™ mechanical seals are ideal for slurry applications. The seals are designed around AESSEAL® modular technology...
PCPS has been developed to incorporate proven modular designs from our highly-acclaimed range of double mechanical seals.
This seal incorporates an integral bi-directional flow inducer for effective seal cooling.
DMSF™ range of double cartridge mechanical seals has been designed as a high performance sealing solution for arduous applications. AESSEAL® believes that the DMSF™ is the most technologically advanced mechanical seal in its class.
The DSNM™ is designed to suit the Flowserve Polychem 'S' Series non-metalic process pump.
The DSWIB™ (Mixmaster II) is a double mixer seal with integral bearing and concentric face design to reduce the seal's overall length.
The standard ESM seal is driven through socket seal clamping. The NCM is the non-chemical-design external seal for mixers.
Single mechanical seal is designed to seal Flue Gas Desulphurization (FGD) and general slurry applications
The FI-DSNM-R™ is designed to suit Richter (ITT-Goulds) PCK and SCK process pumps. This unique cartridge design eliminates the OEM ceramic sleeve.
The FIDC seal is the next generation of high performance sealing solutions offering increased barrier fluid flow for improved reliability.
The HDSS and HDDSS heavy duty slurry seals are designed for the arduous environment of the mining industry. The robust seals are built to withstand levels of pump vibration with large internal clearances accommodating levels of movement.
The IADC™ Screen seal design is a double seal available in a wide range of seal face and elastomer applications
This seal employs standard, modular, inventoried AESSEAL® components, with a seal gland, which retains fluid when the screen is emptied. This avoids dry running of the tungsten carbide seal faces on equipment start-up. The seal is specifically designed for vertical screen applications mainly used on stock and liquor screens in the pulp mill and paper machine areas.
The ISOS™ works around the principal of surrounding the shaft with an inflatable elastomeric bladder. Under normal operating conditions, the bladder remains unpressurized.
The LSEAL™ is designed to suit the Flowserve Polychem 'L' Series, Group I and Group II non-metallic process pumps.
The RDSX™ seal eliminates the need to remove or strip equipment for seal replacement. The self aligning rotary makes the RDSX™ one of the easiest and quickest to install split seals on the market today.
PCPS has been developed to incorporate proven modular designs from our highly-acclaimed range of single mechanical seals.
The SCMS Mixer seal is specifically designed for use on a broad range of mixers, agitators and reactor applications.
A short externally mounted cartridge seal, with flush ports and self-aligning faces.
The SEA2™ and SEH1™ range of cartridge single mechanical seals is specifically designed for the chemical industry. This Exotic Alloy range, offered in standard and ANSI+ configurations, is available in solid Alloy 20 and Alloy 276 materials.
Modular range of stationary cartridge mechanical seals for general applications in all industry sectors.
Cartridge mechanical seals has been specifically designed to eliminate some of the main causes of premature mechanical seal failure
A single cartridge stationary seal with integral Plan 23. Coupled with a helicoil cooler, the seal provides the most efficient sealing solution for this piping arrangement.
The TPOC™ seal range is specifically designed for applications which benefit from the use of unbalanced seal face technology.
a double cartridge seal particularly applicable for medium to heavy duty slurry sealing applications. Integral and extremely efficient bi-directional barrier fluid circulating device.
